Copyright © insulationcart.com | Insulation Cart 2021
Celotex TC3000 provides effective thermal insulation in built-up flat roofing structures - hot applied bituminous, mastic asphalting and torch-on systems. Contains bitumen polypropylene fleece facers on both sides. Thermal conductivity - 0.027 W/mK.
Price: £ 105.00
(£126.00 inc VAT)
Celotex TD4000 provides a quick and easy method of achieving effective thermal insulation in light traffic, ventilated, lead covered, warm flat roof applications - includes 5.5mm WBP plywood. Thermal conductivity – 0.022W/mK
Price: £ 103.13
(£123.76 inc VAT)
Celotex CW4000 insulation board provides a simple insulation solution for partial fill cavity wall applications. Contains low emissivity foil facings.
Price: £ 68.84
(£82.61 inc VAT)
UK delivery time:
5 - 10 days
EPS100 Jablite is an expanded polystyrene (EPS) foam board. EPS100 boards are suitable for applications requiring higher loadbearing capabilities - solid ground floors, roofs and basements of the building. Thermal conductivity - 0.036 W/mK.
Price: £ 87.25 (£104.70 inc VAT) Click to view discounts
5 or more: £85.81 (£102.97 inc VAT)
10 or more: £84.39 (£101.27 inc VAT)
20 or more: £82.24 (£98.69 inc VAT)
75mm EPS100 Jablite Jabfloor is an expanded polystyrene (EPS) board, rigid and tough, closed-cell foam produced by cutting expanded foam blocks.
EPS100 boards can be used to provide successively higher loadbearing capabilities combined with high levels of insulation typically in solid floor applications.
A concrete slab will normally be laid over the insulation to provide a suitable wearing surface.
Jablite Jabfloor EPS100 is manufactured with a blowing agent that contains no CFC’s or HCFC’s and is classified as Zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP).
The material should be stored under cover protected from direct sunlight and out of contact with ground moisture
Thermal insulation subject to higher mechanic loads:
Advantages of 75mm Jablite Jabfloor EPS100 Polystyrene:
Note: This product is combustible and will ignite with a flame.
|Area per pack:||11.52m2|
|Material:||Expanded polystyrene (EPS)|
|Thermal conductivity:||0.036 W/mK|
|Thermal Resistance (R-Value):||2.08 m2K/W|
|Compressive strength at 10% compression:||100 kPa|
|Bending strength:||150 kPa|
|Water vapour resistance:||200 MNs/g|
|Reaction to fire:||Euroclass E|