100mm EPS100 Jablite Jabfloor is an expanded polystyrene (EPS) board, rigid and tough, closed-cell foam produced by cutting expanded foam blocks.

EPS100 boards can be used to provide successively higher loadbearing capabilities combined with high levels of insulation typically in solid floor applications.

A concrete slab will normally be laid over the insulation to provide a suitable wearing surface.

Jablite Jabfloor EPS100 is manufactured with a blowing agent that contains no CFC’s or HCFC’s and is classified as Zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP).

The material should be stored under cover protected from direct sunlight and out of contact with ground moisture

Applications:

Thermal insulation subject to higher mechanic loads:

• fitted below the concrete slab in domestic solid ground-floor constructions
• fitted between or below the joists to provide insulation to suspended timber ground floors
• used below a sand/cement screed, above either a concrete slab, precast suspended concrete floor or beam and block floor system in domestic ground-floor constructions
• EPS100 can also be used in conjunction with underfloor heating systems to reduce downward heat loss

Advantages of 100mm Jablite Jabfloor EPS100 Polystyrene:

• Jablite EPS100 is versatile, light in weight, clean and easy to handle
• Expanded polystyrene EPS100 Jablite is characterised by high strength and structural stability
• Stability of Jablite EPS100 polystyrene does not deteriorate with age
• EPS100 Jablite is moisture resistant, compatible with most building products except materials containing solvents
• EPS100 is non-toxic, non irritant and odourless, is rot proof, unaffected by moulds, fungi or bacteria
• EPS100 does not contain CFC's or HCFC's which makes it very environmentally friendly

Note: This product is combustible and will ignite with a flame.

• Jablite EPS Product Data Sheet