Home  /  Search  /  25mm Kay-Metzeler EPS70 Polystyrene Insulation Board 2400x1200 (pack of 12)

You may also like...

80mm Rockwool Cavity Wall Insulation Batts 1200x455 (pack of 8)

80mm Rockwool Cavity Wall Insulation Batts 1200x455 (pack of 8)

Rockwool Cavity provides a completely reliable and cost-effective method of insulating new masonry cavity walls.

Price: £ 16.03
(£19.24 inc VAT)

65mm Knauf DriTherm 37 Standard Cavity Wall Insulation Slabs 1200x455 (pack of 10)

65mm Knauf DriTherm 37 Standard Cavity Wall Insulation Slabs 1200x455 (pack of 10)

DriTherm 37 Cavity Slabs are for the thermal insulation of masonry cavity external walls, either partially filling or fully filling the cavity. Thermal conductivity - 0.037 W/mK

Price: £ 23.57
(£28.28 inc VAT)

12mm Celotex TB4012 PIR Insulation Board 2400x1200

12mm Celotex TB4012 PIR Insulation Board 2400x1200

Celotex TB4000 is an insulation board designed to eliminate thermal bridges. Applications include: Pitched Roofs, Solid Masonry Walls, Timber Framed & Steel Framed Systems, Floors. Contains low emissivity foil facings.

Price: £ 16.27
(£19.52 inc VAT)

25mm Kay-Metzeler EPS70 Polystyrene Insulation Board 2400x1200 (pack of 12)

UK delivery time:
2 - 3 days

25mm Kay-Metzeler EPS70 Polystyrene Insulation Board 2400x1200 (pack of 12)

EPS70 Kay-Metzeler is expanded polystyrene (EPS) foam. EPS70 boards are suitable for applications subject to low mechanic loads - external walls, pitched roof under rafters, ceilings, insulation of walls with cladding. Thermal conductivity - 0.038 W/mK
Kay-Metzeler

Price: £ 61.25 73.50 inc VAT) Click to view discounts

5 or more: £60.25 (£72.30 inc VAT)
10 or more: £59.24 (£71.09 inc VAT)
20 or more: £57.74 (£69.29 inc VAT)

25mm EPS70 Kay-Metzeler is an expanded polystyrene (EPS) board, rigid and tough, closed-cell foam produced by cutting expanded foam blocks. EPS70 boards are suitable for applications subject to low mechanic loads.

Kay-Metzeler EPS70 is manufactured with a blowing agent that contains no CFC’s or HCFC’s and is classified as Zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP).

The material should be stored under cover protected from direct sunlight and out of contact with ground moisture

Applications:

Thermal insulation subject to low mechanic loads:

  • insulation of timber and metal joist floors
  • insulation of walls with cladding, ventilated by air slots
  • insulation of ceilings from the bottom in Jointless Warming Systems [BSO], i.e. insulation performed in a light-wet method
  • insulation of ceilings made of reinforced concrete as lost planking
  • thermal crown insulation made under the plaster and as insulation of lintels and door frames
  • insulation of steep roofs laid under the bearing structure
  • pitched roof insulation between and over rafters

Advantages of 25mm Kay-Metzeler EPS70 Polystyrene:

  • Kay-Metzeler EPS70 is lightweight, easy to handle, cut and install
  • Expanded polystyrene EPS70 is characterised by high strength and structural stability
  • Stability of EPS70 polystyrene does not deteriorate with age
  • Expanded polystyrene (EPS) is moisture resistant, compatible with most building products except materials containing solvents
  • EPS70 is non-toxic, non irritant and odourless, is rot proof, unaffected by moulds, fungi or bacteria
  • EPS70 does not contain CFC's or HCFC's which makes it very environmentally friendly

Note: This product is combustible when tested to BS476: Part 4 and will ignite with a flame.

Thickness: 25mm
Length: 2400mm
Width: 1200mm
Pack size: 12
Area per pack: 34.56m2
Material: Expanded polystyrene (EPS)
Thermal conductivity: 0.038 W/mK
Thermal Resistance (R-Value): 0.66 m2K/W
Board weight: 1.08kg
Density: 15kg/m3
Compressive strength at 10% compression: 70 kPa
Bending strength: 115 kPa
Dimensional stability: DS(N)5
Water vapour resistance: 145 MNs/g
Fire resistant: NO
Reaction to fire: Euroclass F