Copyright © insulationcart.com | Insulation Cart 2023
Celotex CW4000 insulation board provides a simple insulation solution for partial fill cavity wall applications. Contains low emissivity foil facings.
Price: £ 96.05
(£115.26 inc VAT)
Celotex TC3000 provides effective thermal insulation in built-up flat roofing structures - hot applied bituminous, mastic asphalting and torch-on systems. Contains bitumen polypropylene fleece facers on both sides. Thermal conductivity - 0.027 W/mK.
Price: £ 115.50
(£138.60 inc VAT)
Claylite is a compressible fill material used to reduce the pressure exerted on reinforced concrete ground beams or on the vertical face of concrete foundations, caused by the expansion of clay soils (clay heave) during the life of the structure.
Price: £ 18.14
(£21.77 inc VAT)
UK delivery time:
3 - 5 days
EPS70 Kay-Metzeler is expanded polystyrene (EPS) foam. EPS70 boards are suitable for applications subject to low mechanic loads - external walls, pitched roof under rafters, ceilings, insulation of walls with cladding. Thermal conductivity - 0.038 W/mK
Price: £ 76.25 (£91.50 inc VAT) Click to view discounts
5 or more: £75.00 (£90.00 inc VAT)
10 or more: £73.75 (£88.50 inc VAT)
20 or more: £71.88 (£86.26 inc VAT)
40mm EPS70 Kay-Metzeler is an expanded polystyrene (EPS) board, rigid and tough, closed-cell foam produced by cutting expanded foam blocks. EPS70 boards are suitable for applications subject to low mechanic loads.
Kay-Metzeler EPS70 is manufactured with a blowing agent that contains no CFC’s or HCFC’s and is classified as Zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP).
The material should be stored under cover protected from direct sunlight and out of contact with ground moisture
Thermal insulation subject to low mechanic loads:
Advantages of 40mm Kay-Metzeler EPS70 Polystyrene:
Note: This product is combustible when tested to BS476: Part 4 and will ignite with a flame.
Please note this product is only available in certain areas of the country and may be subject to an additional carriage charges. Please call before placing an order.
|Area per pack:||23.04m2|
|Material:||Expanded polystyrene (EPS)|
|Thermal conductivity:||0.038 W/mK|
|Thermal Resistance (R-Value):||1.05 m2K/W|
|Compressive strength at 10% compression:||70 kPa|
|Bending strength:||115 kPa|
|Water vapour resistance:||145 MNs/g|
|Reaction to fire:||Euroclass F|