Home  /  Search  /  50mm Jablite Jabfloor EPS100 Polystyrene Insulation Board 2400x1200 (pack of 6)

You may also like...

25mm Celotex CW4025 PIR Cavity Wall Insulation Board 1200x450 (pack of 20)

25mm Celotex CW4025 PIR Cavity Wall Insulation Board 1200x450 (pack of 20)

Celotex CW4000 insulation board provides a simple insulation solution for partial fill cavity wall applications. Contains low emissivity foil facings.

Price: £ 68.24
(£81.89 inc VAT)

110mm Celotex XR4110 PIR Insulation Board 2400x1200

110mm Celotex XR4110 PIR Insulation Board 2400x1200

Celotex XR4000 is targeted at ‘cut-to-fit’ applications between rafters or joists. XR4000 is also appropriate for use in floors and walls. Contains low emissivity foil facings.

Price: £ 57.03
(£68.44 inc VAT)

70mm Celotex CW4000 PIR Cavity Wall Insulation Board 1200x450 (pack of 7)

70mm Celotex CW4000 PIR Cavity Wall Insulation Board 1200x450 (pack of 7)

Celotex CW4000 insulation board provides a simple insulation solution for partial fill cavity wall applications. Contains low emissivity foil facings.

Price: £ 57.24
(£68.69 inc VAT)

50mm Jablite Jabfloor EPS100 Polystyrene Insulation Board 2400x1200 (pack of 6)

UK delivery time:
3 - 5 days

50mm Jablite Jabfloor EPS100 Polystyrene Insulation Board 2400x1200 (pack of 6)

EPS100 Jablite is an expanded polystyrene (EPS) foam board. EPS100 boards are suitable for applications requiring higher loadbearing capabilities - solid ground floors, roofs and basements of the building. Thermal conductivity - 0.036 W/mK.
Jablite

Price: £ 77.90 93.48 inc VAT) Click to view discounts

5 or more: £76.62 (£91.94 inc VAT)
10 or more: £75.35 (£90.42 inc VAT)
20 or more: £73.43 (£88.12 inc VAT)

50mm EPS100 Jablite Jabfloor is an expanded polystyrene (EPS) board, rigid and tough, closed-cell foam produced by cutting expanded foam blocks.

EPS100 boards can be used to provide successively higher loadbearing capabilities combined with high levels of insulation typically in solid floor applications.

A concrete slab will normally be laid over the insulation to provide a suitable wearing surface.

Jablite Jabfloor EPS100 is manufactured with a blowing agent that contains no CFC’s or HCFC’s and is classified as Zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP).

The material should be stored under cover protected from direct sunlight and out of contact with ground moisture

Applications:

Thermal insulation subject to higher mechanic loads:

  • fitted below the concrete slab in domestic solid ground-floor constructions
  • fitted between or below the joists to provide insulation to suspended timber ground floors
  • used below a sand/cement screed, above either a concrete slab, precast suspended concrete floor or beam and block floor system in domestic ground-floor constructions
  • EPS100 can also be used in conjunction with underfloor heating systems to reduce downward heat loss

Advantages of 50mm Jablite Jabfloor EPS100 Polystyrene:

  • Jablite EPS100 is versatile, light in weight, clean and easy to handle
  • Expanded polystyrene EPS100 Jablite is characterised by high strength and structural stability
  • Stability of Jablite EPS100 polystyrene does not deteriorate with age
  • EPS100 Jablite is moisture resistant, compatible with most building products except materials containing solvents
  • EPS100 is non-toxic, non irritant and odourless, is rot proof, unaffected by moulds, fungi or bacteria
  • EPS100 does not contain CFC's or HCFC's which makes it very environmentally friendly

Note: This product is combustible and will ignite with a flame.

Thickness: 50mm
Length: 2400mm
Width: 1200mm
Pack size: 6
Area per pack: 17.28m2
Material: Expanded polystyrene (EPS)
Thermal conductivity: 0.036 W/mK
Thermal Resistance (R-Value): 1.39 m2K/W
Board weight: 2.88kg
Density: 20kg/m3
Compressive strength at 10% compression: 100 kPa
Bending strength: 150 kPa
Dimensional stability: DS(N)5
Water vapour resistance: 200 MNs/g
Fire resistant: NO
Reaction to fire: Euroclass E