Dear customers
The shop is temporarily closed for new orders. Our staff was in hospital COVID-19 which caused us some delays. We will reopen as soon as possible and if you have any queries contact us via the e-mail office@insulationcart.com or on the phone 02033978908.

Insulation Cart Team

Home  /  Search  /  75mm Kay-Metzeler EPS70 Polystyrene Insulation Board 2400x1200 (pack of 4)

You may also like...

50mm Claylite Compressible Fill Polystyrene Kay-Metzeler 2400x1200

50mm Claylite Compressible Fill Polystyrene Kay-Metzeler 2400x1200

Claylite is a compressible fill material used to reduce the pressure exerted on reinforced concrete ground beams or on the vertical face of concrete foundations, caused by the expansion of clay soils (clay heave) during the life of the structure.

Price: £ 18.14
(£21.77 inc VAT)

12.5mm Moistureshield Plasterboard - Wallboard Knauf 2400x1200

12.5mm Moistureshield Plasterboard - Wallboard Knauf 2400x1200

Knauf Moistureshield is a plasterboard manufactured specifically for use in areas of high humidity. The core formulation with silicone additive ensure the boards resistance to moisture. Thermal Conductivity - 0.24 W/mK.

Price: £ 16.90
(£20.28 inc VAT)

120mm Celotex TC3000 Flat Roof Insulation 1200x600 (pack of 4)

120mm Celotex TC3000 Flat Roof Insulation 1200x600 (pack of 4)

Celotex TC3000 provides effective thermal insulation in built-up flat roofing structures - hot applied bituminous, mastic asphalting and torch-on systems. Contains bitumen polypropylene fleece facers on both sides. Thermal conductivity - 0.025 W/mK.

Price: £ 89.51
(£107.41 inc VAT)

75mm Kay-Metzeler EPS70 Polystyrene Insulation Board 2400x1200 (pack of 4)

UK delivery time:
2 - 3 days

75mm Kay-Metzeler EPS70 Polystyrene Insulation Board 2400x1200 (pack of 4)

EPS70 Kay-Metzeler is expanded polystyrene (EPS) foam. EPS70 boards are suitable for applications subject to low mechanic loads - external walls, pitched roof under rafters, ceilings, insulation of walls with cladding. Thermal conductivity - 0.038 W/mK
Kay-Metzeler

Price: £ 71.49 85.79 inc VAT) Click to view discounts

5 or more: £70.32 (£84.38 inc VAT)
10 or more: £69.15 (£82.98 inc VAT)
20 or more: £67.39 (£80.87 inc VAT)

75mm EPS70 Kay-Metzeler is an expanded polystyrene (EPS) board, rigid and tough, closed-cell foam produced by cutting expanded foam blocks. EPS70 boards are suitable for applications subject to low mechanic loads.

Kay-Metzeler EPS70 is manufactured with a blowing agent that contains no CFC’s or HCFC’s and is classified as Zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP).

The material should be stored under cover protected from direct sunlight and out of contact with ground moisture

Applications:

Thermal insulation subject to low mechanic loads:

  • insulation of timber and metal joist floors
  • insulation of walls with cladding, ventilated by air slots
  • insulation of ceilings from the bottom in Jointless Warming Systems [BSO], i.e. insulation performed in a light-wet method
  • insulation of ceilings made of reinforced concrete as lost planking
  • thermal crown insulation made under the plaster and as insulation of lintels and door frames
  • insulation of steep roofs laid under the bearing structure
  • pitched roof insulation between and over rafters

Advantages of 75mm Kay-Metzeler EPS70 Polystyrene:

  • Kay-Metzeler EPS70 is lightweight, easy to handle, cut and install
  • Expanded polystyrene EPS70 is characterised by high strength and structural stability
  • Stability of EPS70 polystyrene does not deteriorate with age
  • Expanded polystyrene (EPS) is moisture resistant, compatible with most building products except materials containing solvents
  • EPS70 is non-toxic, non irritant and odourless, is rot proof, unaffected by moulds, fungi or bacteria
  • EPS70 does not contain CFC's or HCFC's which makes it very environmentally friendly

Note: This product is combustible when tested to BS476: Part 4 and will ignite with a flame.

Thickness: 75mm
Length: 2400mm
Width: 1200mm
Pack size: 4
Area per pack: 11.52m2
Material: Expanded polystyrene (EPS)
Thermal conductivity: 0.038 W/mK
Thermal Resistance (R-Value): 1.97 m2K/W
Board weight: 3.24kg
Density: 15kg/m3
Compressive strength at 10% compression: 70 kPa
Bending strength: 115 kPa
Dimensional stability: DS(N)5
Water vapour resistance: 145 MNs/g
Fire resistant: NO
Reaction to fire: Euroclass F