Copyright © insulationcart.com | Insulation Cart 2023
Celotex CW4000 insulation board provides a simple insulation solution for partial fill cavity wall applications. Contains low emissivity foil facings.
Price: £ 77.41
(£92.89 inc VAT)
Claylite is a compressible fill material used to reduce the pressure exerted on reinforced concrete ground beams or on the vertical face of concrete foundations, caused by the expansion of clay soils (clay heave) during the life of the structure.
Price: £ 18.14
(£21.77 inc VAT)
Earthwool Loft Roll 44 is a glass mineral wool quilt specified for insulating pitched roofs at ceiling level and suspended timber floors. The rolls are partially perforated to produce either 2 rolls 570mm wide or 3 rolls 380mm wide.
Price: £ 33.09
(£39.71 inc VAT)
Please call us for an equivalent product
Xtratherm Thin-R XT/CW is a cavity board providing high levels of thermal insulation when building external walls whilst maintaining a residual cavity to prevent moisture penetration. Contains low emissivity foil facings. Thermal Conductivity – 0.022W/mK
Price: £ 56.55 (£67.86 inc VAT) Click to view discounts
5 or more: £55.62 (£66.74 inc VAT)
10 or more: £54.70 (£65.64 inc VAT)
20 or more: £53.31 (£63.97 inc VAT)
35mm Xtratherm Thin-R XT/CW is specifically designed to provide high levels of thermal insulation when building external walls and at the same time maintaining a residual cavity to prevent moisture penetration. 50mm residual cavity should be maintained to suit all exposure zones.
Xtratherm XT/CW offer certified thermal conductivity of 0.022W/mK which allows the boards to achieve exceptionally high standards of thermal performance.
Boards are manufactured with a Square Edge or Tongued and Grooved jointing (not readily available) system resulting in a more robust, continuous layer of cavity wall insulation that minimises the threat of thermal bridging through inaccurate installation. Please specify during checkout if Square Edge or Tongue and Groove jointing is required, if not specified Square Edge will be delivered.
35mm Xtratherm Thin-R XT/CW is specifically designed for:
Advantages of 35mm Xtratherm Thin-R XT/CW Cavity Wall Insulation Board:
Please note this product is only available in certain areas of the country and may be subject to an additional carriage charge
|Area per pack:||4.86m2|
|Material:||Polyisocyanurate (PIR) foam core faced with low emissivity foil facings on both sides|
|Thermal Resistance (R-Value):||1.59 m2K/W|
|Density (Foam Core):||26-30 Kg/m3|
|Compressive Strength:||>120 kPa|
|Water Vapour Resistivity:||>100 MNs/gm|
|Service Temperature:||-20 to 100 ºC|
|Surface Spread of Flame:||Class 1|